Description

BMW K75 piston ring set (standard size)

(segments, piston rings)

The set is used to equip three pistons.
The standard dimension is 67.00 mm.
The cylinder internal dimension is measured.

1. Compression ring: Rectangular ring - DLC coated due to Nikasil coated cylinder bore

2. Compression ring: minute ring for quick running in or adjustment of the ring (with or without anti-rotation device)

Oil scraper ring: 3 parts - 2 steel rings with hard chrome-plated running surface - 1 clamping ring

IMPORTANT:
Since the BMW K75 model has undergone a change in the engine (cylinder head, pistons and piston rings) over the years, you have to be careful here! Therefore there are different spare part numbers.

You should not simply go by the year of manufacture of your K75, as theoretically a previous rebuild could have used pistons from a different year.

In order to be sure which ring set you need, you must check whether your pistons have an anti-twist device on the 2nd compression ring (minute ring) or not.

We deliberately created only one K75 standard size article so that the wrong ring set is not accidentally ordered! Please use the option.

Original spare part number:

up to 02/1988: (minute ring without anti-twist device) 11251460994
from 02/1988 (minute ring with anti-twist device) 11251461958

In terms of their composition and quality, our piston rings are among the technically best that is currently available on the market.


DLC coating = Diamond Like Carbon - This is a carbon coating that is applied using the plasma process.
The coating is 3 times harder than chrome-plated piston rings, further minimizing ring wear. Its thermal conductivity is 5 times that of copper (one of the best conductors of heat), improving heat dissipation from the piston to the cylinder. In addition, the coefficient of friction is only half that of Teflon, resulting in even less wear on the cylinder.